Products

Ensamblaje de perno de giro corto (latón), Diám. 16 mm, M18x58 mm Parte No : R4583A01-07-00

Syphon Tube

T50 Gas Relief Valve - Pressure range from 100 to 525.5 PSI (6.90 to 36.24 bar). Design temperature: -55ºC to 80ºC. Contact parts in stainless stee...

2" T50 Gas Valve - 500 PSI (34.5 bar) pressure setting, test pressure 1015 PSI (70 bar). Inlet flange drilled with 4x18 holes equally spaced at 125...

with Rupture disc 89mm, burst pressure 30.25bar and disc adaptor  flange, 316 Stainless Steel

2" T50 Fluid Valve 500PSI (34.5 bar) pressure setting, test pressure 1015PSI (70 bar). Inlet flange drilled with 4 holes of 18 on 125 mm PCD. Compl...

Cryogenic Three Way Ball Valve ”T" type three-way ball valve is mainly used as the safety valve installation .PCTFE seal, SS 304, Nominal Diam DN 2...

Cryogenic emergency shut-off valve - An emergency shut-off valve for cryogenic equipment such as cryogenic storage tanks or tankers. When the outsi...

Cryogenic emergency shut-off valve - An emergency shut-off valve for cryogenic equipment such as cryogenic storage tanks or tankers. When the outsi...

Cryogenic Emergency cut-off Valve An emergency shut-off device for cryogenic equipment such as cryogenic storage tanks or tank trucks. When the out...

Cryogenic needle valve Suitable for LNG, prevents medium backflow. With PCTFE seal. Design temperature range - 196ºC to 80°C.

Cryogenic Globe Valve suitable for LNG or other cryogenic medium. With PCTFE packing. Design temperature -80 ~ 80ºC  Article No. DJS...

Cryogenic globe valve Suitable for LNG or other cryogenic medium. With PCTFE seal. Design temperature range -196 to 80 °C.

Cryogenic globe valve suitable for LNG or other cryogenic medium. With PCTFE seal. Design temperature range -196ºC ~ 80ºC

Cryogenic globe valve Suitable for LNG or other cryogenic medium. With PCTFE gasket. Design temperature range -196ºC ~ 80ºC

Safety valve. Welded inlet and outlet. 1.6 MPa pressure setting with PCTFE gasket.

The flame arrester is made up of many small pipes and gaps so that the gas can penetrate. These pipes and gaps are extremely small so they can...

Oil Discharge Valve -installed at the bottom of the tank, using quick connection, can quickly unload oil, is an important part of the bottom of the...

Tank Seal for 1,5" BSP Safety Relief Valve

Stud For T50 Relief Valve

1.5" Air Inlet Ball Valve Rear Seal(Perolo)

1.5" Air Inlet Ball Valve Front Seal(Perolo)

Analogue temperature gauge with 3000 mm capillary, DN100/4", range: -40ºC ~ 180ºC / -50º F ~ 350º F. Bottom connection.