Products

Alloy 400 Disc  316 SS Inlet Ring, BURST PRESSURE:  3.3 MIN to 3.7 MAX barg @ 10 Deg C

4" 180 Foot Valve - Inlet flange drilled 8 14mm holes equi-spaced on a PCD 190,Outlet flange drilled 8 17mm holes equi-spaced on a PCD 180.Option-S...

4" 45 graden bodemafvoer, 4" 45 graden voetklep

4" 45 Quick Flow Bottom Valve - Inlet flange drilled 8 18mm holes equi-spaced on a PCD 210, Outlet flange drilled 818mm holes equi-spaced on a PCD ...

316   JX964C01-00

WAMP: 6 Bar, Design Temperature: -40 to 190°C

4" BSP dust cap stainless steel with chain and PTFE seal, stainless steel 316

4" 90 Bottom Discharge(Coating) - The inlet flange is 8x16 onthe flange surface of PCD 250mm. The outlet flange is 8x18 on theflange surface of PCD...

Low melting alloy as the fusible part

4" Flanged Ball Valve GB

Junta de Viton

4" Light Flanged Ball Valve GB

Material: Stainless Steel 316L

316 SS

4" 45 Quick Flow Foot Valve With Heating-Inlet flange drilled 8 18mm holes equi -spaced on a PCD 210, Outlet flange drilled 8 18mm holes equi -spac...

6 Fastening Points, 4 bar, Height 70MM, 316L stainless steel with Nitrile Rubber Gasket

Snelle doorstroming, SS316 -Flens geboord 8× Φ 18× PCD 210.Afvoer 8x φ18x PCD180

304, 316 stainless steel, 6 bar, Seal: PTFE, FEP/SILICON

Robuuste 4" vlinderklep met PFA-voering voor betrouwbare afsluiting in chemische en corrosieve toepassingen. De PFA-bekleding biedt uitstekende ch...

4″ Angle Sulfur Cut-off Valve – Inlet flange is 8 xф18 equispaced on the PCD180mm flange, outlet flange is 8x ф 18 equispaced on the PCD 180mm flan...

Rotary Bottom Valve-Body upper inlet flange mounting size 4x10.5", all distributed on 134 circle. Body lower outlet flange mounting size 8x14", all...

5" 180º foot Valve - inlet flange drilled with 8x18 holes equally spaced on a 210 mm PCD; outlet flange drilled with 8x18 holes equally spaced on a...

5" 30º Foot Valve - inlet flange drilled 8x18 holes equi-spaced on a 210mm PCD; outlet flange drilled 8 18 holes equi-spaced on a 200mm PCD. Contac...